| | VT 365 Hard Start |  |
|
|
| Author | Message |
|---|
lakeside
Posts : 28
Join date : 2016-04-20
| | Subject: VT 365 Hard Start Wed May 11, 2016 5:45 am | |
| any idea's I have a 2006 IC with a VT365 that is hard to start when hot.
already did the air pressure test and changed the injector O-rings, high pressure oil pump, and the oil rail down tub
the lower oil pump was changed on 10.29.15 | |
|
| | |
b1
Posts : 56
Join date : 2016-04-07
| | Subject: Re: VT 365 Hard Start Wed May 11, 2016 7:05 am | |
| What is the ICP pressure when cranking hot and also what codes if any? | |
|
| | |
lakeside
Posts : 28
Join date : 2016-04-20
| | Subject: Re: VT 365 Hard Start Wed May 11, 2016 12:05 pm | |
| | |
|
| | |
b1
Posts : 56
Join date : 2016-04-07
| | Subject: Re: VT 365 Hard Start Wed May 11, 2016 12:34 pm | |
| Go ahead with the injectors but I need you to keep track of each injector comming out by labeling them per cylinder. Do not return the old injectors until I tell you to. After you install the new injectors I want you to post the ICP pressure cold and hot and keep me informed of the situation. | |
|
| | |
lakeside
Posts : 28
Join date : 2016-04-20
| | Subject: Re: VT 365 Hard Start Wed May 11, 2016 1:32 pm | |
| | |
|
| | |
TMORRISSEY
Posts : 5
Join date : 2016-04-18
| | Subject: Re: VT 365 Hard Start Thu May 12, 2016 6:18 am | |
| WE HAVE THIS IDENTICAL PROBLEM AT LEMONT WITH A VT 365. WE ARE AT THE SAME PLACE ..AIR TEST DONE ETC... | |
|
| | |
b1
Posts : 56
Join date : 2016-04-07
| | Subject: Re: VT 365 Hard Start Thu May 12, 2016 7:13 am | |
| - TMORRISSEY wrote:
- WE HAVE THIS IDENTICAL PROBLEM AT LEMONT WITH A VT 365. WE ARE AT THE SAME PLACE ..AIR TEST DONE ETC...
What is the cold and hot ICP pressures and list any codes | |
|
| | |
lakeside
Posts : 28
Join date : 2016-04-20
| | Subject: Re: VT 365 Hard Start Tue May 17, 2016 2:13 pm | |
| ok after I replaced the injectors cold ICP pressure is 700+ and hot is 600 | |
|
| | |
b1
Posts : 56
Join date : 2016-04-07
| | Subject: Re: VT 365 Hard Start Tue May 17, 2016 2:28 pm | |
| - lakeside wrote:
- ok after I replaced the injectors cold ICP pressure is 700+ and hot is 600
And did it solve your problem? It should have enough hot pressure now to start. | |
|
| | |
lakeside
Posts : 28
Join date : 2016-04-20
| | Subject: Re: VT 365 Hard Start Wed May 18, 2016 5:07 am | |
| yes the problem is finally solved | |
|
| | |
b1
Posts : 56
Join date : 2016-04-07
| | Subject: Re: VT 365 Hard Start Wed May 18, 2016 6:50 am | |
| - lakeside wrote:
- yes the problem is finally solved
Send those injectors you took out directly to me. | |
|
| | |
lakeside
Posts : 28
Join date : 2016-04-20
| | Subject: Re: VT 365 Hard Start Wed May 18, 2016 6:55 am | |
| | |
|
| | |
Sponsored content
| | Subject: Re: VT 365 Hard Start | |
| |
|
| | |
| | VT 365 Hard Start | |
|
